Varenr.: 621023-21-2
Bygges først ved bestilling. Op til 1 måneds levering.
Beløbet hæves som forudbetaling og kan ikke returneres.
14 dages retur ret frasiges derfor også.
Facia plate 2-DIN and HU Adapter Kit BMW
Many car manufacturers install car specific head units to fit the optical
picture of the dashboard.
Installation kits include all components for replacing an OEM HU.
Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.
Please check the installation recommendations for the individual components.
In some cases, not all vehicle functions are supported.
For example, Trailer Assist, E Call, or other driver assistance systems.
Please check the OEM HU and vehicle settings for available settings bevore installation.
Please check all functions bevor final installation.
Also check our listed OEM head units and compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Note:
CAN Bus
connector: 40 Pin Quadlock BMW
connector: LVDS
connector: Fakra(m) > ISO
connector: RCA > OEM amplified system (no fader)
vehicles with NBT OEM HU (no NBT EVO)
vehicles with OEM amplified system
+12V power batterie (fused)
OEM HU installation in trunk (look manual)
OEM display funktion retained
PDC/warning chimes retained
Vehicle application:
BMW 1er (F20/F21) 2012 - 2016
BMW 2er (F22/F23/F87) 2014 - 2017
Colour: black
Following signals are provided:
Ignition
Illumination
Reverse
Speedpulse
Parkingbreak
SWC
vehicle settings
warning chimes
rear PDC
