KOMPLET MONT. KIT AUDI A4/A5 2008 > 2016 UDEN MMI

Komplet kit til montering af 2-din.

Facia plate 2-DIN and HU Adapter Kit Audi

Many car manufacturers install car specific head units to fit the optical picture of the dashboard.

Installation kits include all components for replacing an OEM HU.

Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and restore vehicle functions are included in the scope of delivery.

Please check the installation recommendations for the individual components.

In some cases, not all vehicle functions are supported.

For example, Trailer Assist, E Call, or other driver assistance systems.

Please check the OEM HU and vehicle settings for available settings bevore installation.

Please check all functions bevor final installation.

Also check our listed OEM head units and compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Note:

vehicles with SWC

CAN Bus

connector: 40 Quadlock Pin Audi
connector: 20 Pin heater connector (f)/(m)
connector: OEM AUX > RCA red/white
connector: Fakra(m)(double) > DIN(m)

vehicles with OEM tuner in the dashbord

vehicles witout MMI OEM System
vehicles without extrernal OEM tuner in the boot

supported functions:

Auto Headlights / Leaving Home Light Time / Come Home Light Time / Daytime Running Lights / Head Lamp Conversion / Unlock Single Door / Auto Locking / Boot Lid and Tailgate / Parking Volume Front/Rear / Parking Freq Front/Rear / Window Convenience Open Front/Rear / Windscreen Wiper Service Position / Rain Sensor / Drive Select / Auto Recirc / Synchronisation

Vehicle application:

Audi A4 B8 (8K) 02/2008 - 10/2011
Audi A4 B8 (8K) 02/2012 - 01/2016
Audi A5 (8F/8T) 09/2007 - 07/2011
Audi A5 (8F/8T) 10/2011 - 07/2016

Following signals are provided:

Ignition
Illumination
Reverse
Speedpulse

SWC

vehicle settings
parking sensor audio and graphics