DOBBELT KAMERA TIL CAMPER HVID

ZENEC‘s double lens reversing camera ZE-RVSC175 has been specially developed for partially and fully integrated motorhomes.
The compact ZE-RVSC175 has two camera modules with different focal lengths optimized for the respective field of view. Cam1 at the top of the camera housing is the “digital rear-view mirror“ offering a straight view back on the traffic situation. Cam2 located in the lower part of the housing features 100° viewing angle tilted downward for clear view behind and close proximity to the vehicle – for reversing and maneuvering.
ZENEC‘s ZE-RVSC175 is equipped with the latest PC3089D CMOS sensors, which ensure high image resolution and contrast. Cam2 features LDR controlled IR LEDs, ensuring good illumination of the area behind the vehicle at dusk and night.
Equipped with a 3-part separable system cable with a main cable length of 17 meters, this ZENEC reversing camera model can be installed in many motorhomes. The cam is mounted to the vehicle by the M16 hollow thread on the cam backside. The 16 mm drill for the wall breakthrough is included in the set.
The ZE-RVSC175 is compatible with monitors and 1-DIN or 2-DIN moniceivers, naviceivers and infotainers that support connection and control of two camera systems.
Compact and elegant twin-sensor rear view camera
Cam1 sensor with 45° and Cam2 sensor with 100° horizontal view angle
IR-LED night-illumination system for Cam2 with dynamic LDR brightness control
High quality CMOS picture sensor with low power consumption
Detailed high contrast picture under twilight conditions
Plastic injection main housing with M16 threaded hollow bolt for mounting
Separable 3-part system cable with 17.0 m main cable length

Image device ⅓" / 8.5 mm PC3089D CMOS sensor
Lens focal length Cam1 / Cam2 f6.0 / f2.25
View angle (horiz.) Cam1 / Cam2 45° / 100°
TV system NTSC / 60 fps
Sensor resolution 728(H) x 488(V) pixels
Native sensor resolution (SOC) 732(H) x 504(V) pixels
Resolution of video-out signal > 550 TV lines
Frame rate 60 fields/sec.
Signal to noise ratio > 46.5 dB
Light sensitivity 0.4 Lux Cam1; 0.0 Lux Cam2 IR-ON
Video output 1.0 Vp-p (+/-0.2 V), 75 ohms, CVBS
White balance auto
Backlight compensation auto
Dynamic range 60,7 dB
Gain control auto
Synchronization auto
Power supply DC 12V (9.0-16.0 V DC)
Current consumption (@DC12V) 40mA Cam1 + 80 mA Cam2 / 1440 mW
IP protection rating IP68
Operating temperature -20°C~+70°C