AUDIO SYSTEM ADSP68 6 TIL 8 DSP

The powerful software allows you to set all the functions of the DSP on a single page with simplicity and intuitiveness, so that it can be used even by the less experienced. Possibility of use in offline mode, so you can create a configuration and insert it in the DSP at any time.

SPECIFIKATIONS

​

INPUT MODE: Low Level (LL) / High Level (HL)

INPUT IMPEDANCE: > 15Kohm (LL) / 47ohm (HL)

INPUT SENSITIVITY: RCA / Cinch 400mv 1 x COXA Highlevel 5 – 10 Volts or 10 – 20 Volts

MAX OUTPUT SIGNAL: 5Vrms

THD DISTORTION: <0.002% @ 1Vrms

FREQUENCY RESPONSE: 20Hz ÷ 22KHz (within -0.3dB)

CHANNEL SEPARATION: >88dB (@ 1KHz)

SUPPLY VOLTAGE: 11V ÷ 15V

CURRENT CONSUMPTION: 0.4A @ 12V

GROUND ISOLATION vs CAR BODY: 1Kohm

AUTOSENSE: two operative modes (yes, HL only)

REMOTE OUTPUT: 50mA max.

COMMUNICATION PERIPHERALS: Bluethooth, Remote controller

OPTICAL BOARD: S/PDIF

SIZE: 197 x 120 x 39 mm (including fixing feet)
Description
Digital Signal Processor to 6 inputs and 8 outputs.

32Bit 192Khz

6 input channels, 8 output channels

Time-Delay with 0.02 msec steps, inclusion in cm, or msec.

All settings are in real-time

External control with display for presets and main settings

USB connector for the PC via adjustments

Input Low-Level or High-Level Auto-Sense (only in High-Level)

Aux with Auto-Fading for stereo signal, speakerphone and navigation

5 presets

Matrix Mixer to mix and match input / output channels at will

SUM function (input) for active OEM systems / sources

​Operating voltage – 9 – 15 Volts (max. 5 sec. down to 6 Volts)

Additional features – USB Bluetooth, DRC controller